Monday, March 19, 2012

iINFORMASI AUTOMATIC GEARBOX OIL COOLER

AUTO COOLER PASANG BAHAGIAN DEPAN
AUTOMATIC TRANSMISSION  OIL COOLER
AUTO COOLER PANDANGAN  DARI ATAS 




The key to automatic transmission life is keeping the transmission fluid fresh, clean and 
cool. When fluid temperature exceeds the optimum operating range of 160 to 200 degrees, it begins to burn, decreasing the life of the fluid and in turn the life of the seals, bearings and all moving parts. Installation of a cooler will extend the life of the transmission and help prevent costly repairs.
OIL COOLER  AUTOGEARBOX INSTALLATION DIAGRAM











Choosing the Right Transmission Cooler
Select the correct transmission cooler by determining where there is enough t numbers the best three positions to mount the transmission cooler in order. Transmission coolers are more efficient when they receive maximum air flow.
Position 1, the transmission cooler is 100% efficient.
Position 2, between the air conditioning condenser and radiator, is 75% efficient.
Position 3, between the radiator and fan, is only 60% efficient. 
If positions 2 or 3 are used, a larger transmission cooler will be needed to compensate for the loss of cooling power. If this is the case, choose a transmission cooler that is one or two sizes larger.
Transmission coolers help extend the life of your transmission fluid and can prevent transmission failure from overheating.
With each 20 ° drop in operating temperature, your fluid and equipment life doubles.
Installing a cooler before damage starts and by reducing the transmission fluid temperature by as much as 60 ° can greatly extend the life of your transmission.Installing a transmission cooler can prevent transmission burnout.



Tuesday, March 13, 2012

Memasang automatic gear box oil cooler / Autotransmission oil cooler installation proceduer


Memasang automatic gear box oil cooler / Autotransmission oil cooler installation proceduer

Gear Box kereta saya dah lebih 7tahun,penyakit dah datang,biasalah tu barang mekanikal mestilah rosak.Gear drive dah kerap jadi gear free.Semasa service gearbox saya terus pasang oilcooler sekali.Selepas service,gearbox masih beroperasi dengan baik dah masuk dua minggu gear bergerak lancar.Memang penting minyak gearbox ni yee,,korang kalau service gantilah dengan minyak gear yg berkualiti tinggi baru tahan gearbox tu.
Oil cooler saya pasang jenis JASMA yg 13row untuk keterangan boleh rujuk kat bawah=


JASMA 

SuperCooler oil cooling systems

* In addition to transmission coolers, JASMA SuperCoolers are suitable  
   as engine,  power steering & differential fluid cooler.

* Wide range of sizes are available - suitable for any application.

* These are most efficient coolers by size & weight you can buy.

* More efficient than ordinary tube & fin coolers.

* Rigid " stacked Plate " design is resistant to damage from flying debris.

* All aluminum brazed construction provides superior strength light 
   weight & minimum size.
  
 * All cooler are pressure tested to 200 PSI.



JASMA SuperCooler are 100% aluminum construction and use stamped plates sandwiched together to create one of the most efficient oil cooler devices available.
Not only does this unique design provide for maximized cooling through more efficient heat dissipation but it also provides a much sturdier cooler which is practically impervious to flying rocks or other debris. The JASMA SuperCooler also offers an additional feature known as " Low Pressure Drop ". The coolers assembled with hose bard ends include a unique bypass feature allowing a controlled amount of ATF to bypass the  stacked plate core when the fluid s cold. This is beneficial in cold climate area to guard against lube system failure. Controlled by viscosity, fluid is returned directly to the lube circuit through bypass openings in the stacked plate core. This highly efficient design combines improved protection against lube system failure with  the required levels of optimal heat transfer.
Bahan yg diperlukan,oilcooler,hose,clips
Oil cooler boleh disambung terus dari gear box atau dari pipe radiator auto.untuk kereta wira ni saya sambung terus dari gear box ke oil cooler,sebab pipe radiator penyejuk gear box saya ada masalah sikit.kalau pipe radiator anda ok,lebih baik sambung terus disitu boleh jimat hose pvc dan minyak gear lebih dapat penyejukan.
Cara-cara
1.Buka bumper hadapan,pilih tempat yang sesuai untuk menempatkan oil cooler tersebut.kalau boleh jangan terlalu jauh dari gear box

2.buka dua pipe penyejuk gear box,kalau nak sambung terus dari radiator buka satu sahaja.


                                  longgarkan clip utk mecabut hose
                                  

                                         hose sudah dicabut

3.ukur dgn tepat panjang oil hose yg diperlukan.

4.Pasang oil cooler ditempat yg anda pilih ,gunakan plat aluminium untuk menggantung coller ke body kereta atau apa2 cara yg anda fikirkan sesuai.janji benda tu terpasang dengan kukuh.mounting atas saya gunakan plat aluminium yg bawah saya ikat dengan cable tie saja.

5.pasang  kedua-dua oil hose dari gerar box terus ke oil cooler(.kalau nak sambung ke radiator caranya satu hose dari gear box sambung ke oil cooler,dari oil cooler sambung ke radiator dan dari radiator sambung ke gear box)

6.ketatkan klip hose secukupnya.
7.Tambahkan minyak gear box secukupnya.lihat post service gear box auto untuk menambah minyak gearbox auto.chek dikawasan sambungan hose ,pastikan tiada berlaku kebocoran disitu.
8.Pandu kereta anda,pastikan gear box berfungsi dengan baik.pegang hose dan oil cooler kalau terasa panas bermakna minyak gear box mengalir dengan lancar di oil cooler tersebut.
9.Pasang bumper semula…selesai



performance part catalogue

performance part catalogue
car performance part

LinkWithin

Related Posts with Thumbnails